TECHNICAL
DETAILS.

Full-colour anodised aluminium, defined by material, process and evidence.

ENDURALOX® is a full-colour anodised aluminium material system in which graphics and information are printed into the anodic layer and locked below the surface as part of the anodising workflow.

There is no applied film, laminate or graphic surface layer. Sealing completes the anodising cycle and the image remains within the aluminium oxide rather than sitting on top of the material.

SUITABLE FOR INTERIOR, EXTERIOR, ARCHITECTURAL AND INDUSTRIAL APPLICATIONS.

01

ONE CONTROLLED
MATERIAL SYSTEM.

ENDURALOX® is controlled from aluminium selection through anodising, printing, sealing, finishing and final inspection.

1.1

ALUMINIUM

1.2

ANODISING

1.3

PRINT

1.4

SEAL

1.5

FINISH

1.6

QA

MATERIAL, PROCESS AND QUALITY CONTROL ARE MANAGED AS ONE PRODUCTION SYSTEM

2.0

AT A GLANCE.

ENDURALOX® is produced on architectural-grade aluminium sourced through a controlled European supply pathway. The finished anodised surface has a light grey metallic appearance, with unprinted areas showing the aluminium itself.

ALLOY
5005 (AlMg1) · 5754 (AlMg3)

THICKNESS
0.5 · 1.0 · 1.5 · 3.0 mm

MAXIMUM PRINTABLE AREA
1960 mm × 960 mm (standard)
2100 mm x 1140 mm (on application, longer lead time)
77.2 × 37.8 in

PRINT RESOLUTION
Up to 2800 dpi

EXPOSURE
Interior and exterior

FINISH
Matt anodised aluminium
Satin anodised aluminium (on application)
Gloss anodised aluminium (on application)

03

INDEPENDENT
TEST RESULTS.

ENDURALOX® has been independently tested to international test methods

3.1

COATING THICKNESS

20.7 µm

The grade specified for exterior architectural work, twice the interior minimum.

MEETS PERFORMANCE CRITERIA: AS 1231 AA20 (AU) · EN ISO 7599 AA20 (EU) · AAMA 611 Class I (US)
MEASURED BY: Cross-section microscopy at 500×

3.2

CORROSION

No Pitting

No corrosion pits were visible after 1,000 hours of neutral salt spray exposure.

COMPARED WITH: AAMA 611 Class II (US) · 1,000 hours · up to 15 pits permitted
MEASURED BY: ISO 9227 neutral salt spray · 1,000 hours

3.3

ANODIC COATING WEIGHT

3,949 mg/ft²

Nearly four times the selected US military minimum and 77% above the selected architectural benchmark.

COMPARED WITH: MIL-PRF-8625F Type II · 1,000 mg/ft² minimum · AAMA 611 Class II · 2,230 mg/ft²
MEASURED BY: ASTM B137

3.4

SEAL QUALITY

1.05 mg/in²

Almost 60% below the AAMA 611 maximum for sealed anodic coatings.

MEETS PERFORMANCE CRITERIA: AAMA 611 (US) · 2.6 mg/in² maximum
MEASURED BY: ASTM B680 acid dissolution

3.5

COLOUR RETENTION, BLACK

3.0 ΔE

Accelerated exposure reported by the laboratory as approximately equivalent to 16 years of Florida sun.

MEASURED BY: Accelerated UV chamber · 48-hour cycle

3.6

MIL-PRF-8625F TYPE II

3.9x

THE SELECTED MIL-PRF-8625F TYPE II MINIMUM COATING WEIGHT

Independent ENDURALOX® test results have been compared with selected performance benchmarks in MIL-PRF-8625F Type II for anodic coatings on aluminium.

COATING WEIGHT
3,949 mg/ft²
SELECTED BENCHMARK: 1,000 mg/ft² minimum

CORROSION
1,000 hours · zero pits
SELECTED BENCHMARK: 336 hours · 15 pits permitted

04

BUILT IN.
NOT BUILT UP.

Most methods of putting full-colour graphics onto aluminium create another layer above the metal.

ENDURALOX® does not.

The graphics are integrated into the anodic layer and sealed within the finished material.

NO FILM. NO LAMINATE. NO GRAPHIC SURFACE LAYER.

4.1

SURFACE APPLIED SYSTEMS


Three applied layers above the metal. Peel, edge lift, chalking and delamination all begin here.

4.2

ENDURALOX®


Nothing is added above the metal. The image sits inside the aluminium oxide and the seal locks it in.

4.3

NOT PHOTO-ANODISING

Photo-anodised aluminium uses a light-sensitive photographic process within the anodic layer.

ENDURALOX® uses direct digital imaging to produce full-colour graphics, variable information and fine technical detail without a photographic exposure stage.

4.4

NOT DYE SUBLIMATION

Dye sublimation transfers an image into a polyester coating applied to the aluminium.

ENDURALOX® has no applied polyester coating. The image is held within the anodic layer itself.

4.5

NOT UV PRINTING

UV printing cures ink onto the surface of a substrate.

ENDURALOX® places the image below the finished anodic surface rather than leaving the print exposed on top.

4.6

NOT VINYL, FILM, LAMINATE OR PAINT

They create an applied graphic layer on the surface of the material.

ENDURALOX® has no applied graphic layer, adhesive bond line, film edge or graphic laminate.

05

MATERIAL, COLOUR & GRAPHIC CAPABILITY.

5.1

APPEARANCE

The ENDURALOX® surface is matt anodised aluminium with a light grey metallic appearance.

Areas left unprinted show the aluminium substrate.

White ink is not printed. Where artwork contains white, the unprinted anodised aluminium provides the light area of the design.

5.2

COLOUR

Artwork is reproduced in CMYK.

PMS and RAL references can be reproduced to the closest achievable equivalent but should be treated as approximate.

Where colour is critical, specify a printed sample on the intended substrate before production.

5.3

LARGE-FORMAT & MULTI-PANEL WORK

The maximum printable area is 1960 × 960 mm per panel.

Artwork can be scaled and aligned across multiple panels for larger architectural, interpretive and information applications.

5.4

BATCH CONSISTENCY

Anodised aluminium is a translucent architectural finish and its appearance changes subtly with viewing angle and light.

For adjacent panels and multi-panel installations, the full quantity should be produced together and installed in the sequence supplied.

PRINT RESOLUTION UP TO 2800 DPI · FINE TEXT · SYMBOLS · SCHEMATICS · DIAGRAMS · MAPS · DATA MATRIX · SERIALISATION · TECHNICAL GRAPHICS

06

FABRICATION & INSTALLATION.

ENDURALOX® is supplied as finished material.

CNC MILLED · EDGE FINISHED · SEALED · INSPECTED

No laminating, coating or post-print finishing is required.

Panels can be installed using the fixing method appropriate to the project, including:

  • Mechanical fixings

  • Adhesive fixings

  • Standoff & locator fixings

  • Frames & trays

Allow for normal aluminium thermal movement where panels are large or fully restrained.

CUT EDGES

ENDURALOX® solid aluminium has no organic decorative core exposed when cut, drilled or routed.

CLEANING

The sealed anodised surface can be maintained using mild detergent and water.

07

MATERIAL & END OF LIFE.

ENDURALOX® has no surface-applied decorative film, laminate or top coat.

The finished solid aluminium panel therefore does not become a plastic-film and metal composite simply to carry the graphic.

At end of life, solid ENDURALOX® panels remain aluminium and can enter standard aluminium recovery pathways.

08

COMMON QUESTIONS.

CAN ENDURALOX® BE USED OUTDOORS?

Yes. ENDURALOX® is produced for both interior and exterior applications. Its anodic coating thickness, corrosion performance and seal quality have been independently tested, with the results published above.

IS THE GRAPHIC PRINTED ON THE SURFACE?

No. The graphic is printed into the anodic layer before sealing. The final sealing process locks the image below the finished surface rather than leaving a graphic layer applied on top.

CAN ENDURALOX® PRINT WHITE?

No. ENDURALOX® uses CMYK printing. Unprinted areas reveal the light grey metallic anodised aluminium and can be incorporated into the artwork as its lightest areas.

Visually, these areas can often present as white, depending on the surrounding contrast.

CAN PMS AND RAL COLOURS BE MATCHED?

PMS and RAL references can be reproduced to the closest achievable equivalent. Where colour is critical, specify a printed sample on the intended material before production.

WHAT IS THE MAXIMUM PRINTABLE SIZE?

The maximum printable area is 1960 × 960 mm per panel. Larger designs can be produced across multiple aligned panels.

HOW FINE CAN THE PRINT DETAIL BE?

ENDURALOX® prints at up to 2800 dpi and can reproduce fine text, linework, diagrams, maps, symbols and detailed technical graphics.

CAN ENDURALOX® REPRODUCE QR CODES AND DATA MATRIX CODES?

Yes. ENDURALOX® can reproduce QR codes, Data Matrix codes, serialised information and other machine-readable graphics.

Very small codes should be proofed using the intended scanning device before production.

CAN EVERY PANEL HAVE DIFFERENT INFORMATION?

Yes. Digital production allows variable information, numbering, serialisation, codes and other panel-specific graphics within a production run.

CAN ENDURALOX® BE PRINTED DOUBLE-SIDED?

Yes. ENDURALOX® can be produced with graphics on both sides where double-sided information or visibility is required.

CAN ENDURALOX® BE SUPPLIED AS AN ACM PANEL?

Yes. ENDURALOX® can be supplied in an ACM panel construction where the application requires the additional rigidity of a composite panel.

DOES ENDURALOX® REQUIRE A SURFACE COATING?

No. No additional clear coat, protective film or graphic surface coating is required. The graphic is locked within the anodic layer during sealing

DOES ENDURALOX® USE UV RESISTANT INKS?

Yes. ENDURALOX® uses UV-resistant inks as part of its controlled printing process. The inks are printed into the anodic layer before the aluminium is sealed rather than being applied as a conventional surface print.

CAN ENDURALOX® BE CUT, DRILLED AND FABRICATED?

Yes. ENDURALOX® can be CNC milled, cut and drilled. It is not intended for conventional bending after production, but larger panels can be rolled to a large radius where the application requires a curved form.

HOW IS ENDURALOX® INSTALLED?

ENDURALOX® can be installed using conventional methods appropriate to aluminium panels, including mechanical fixings, adhesive systems, standoffs, frames and trays.

HOW SHOULD ENDURALOX® BE CLEANED?

The sealed anodised surface can be maintained using mild detergent and water.

IS ENDURALOX® SUPPLIED FINISHED?

Yes. Panels and plates can be supplied printed, sealed, CNC milled, edge finished and inspected, ready for fabrication or installation.

ARE MILL CERTIFICATES AVAILABLE?

Yes. Mill certificates for the aluminium can be supplied on request where required for project documentation or specification.

ARE PRODUCTION QA REPORTS AVAILABLE?

Yes. QA reports covering the ENDURALOX® handling, printing and sealing process can be supplied on request.

WHERE CAN ENDURALOX® BE BOUGHT?

ENDURALOX® is supplied trade worldwide through ENDURALOX® and appointed trade partners.